Table of Contents
Advertisement
COOK I-flex
OPERATING INSTRUCTIONS
Cleaning the induction
hob niche
Caution!
Damage to B.PRO Control control electronics
The B.PRO Control control electronics are installed in the left-hand extraction bridge. The rear
top surface, which is mounted in the exhaust duct, must not be detached or removed.
– Clean the exhaust duct without detaching or removing the B.PRO Control control electronics
or parts of it.
Installing filter cassettes and putting extraction bridge lid back in place
)
Proper operation of the unit is only ensured when all filter cassettes are installed correctly.
)
Ensure the individual filters are securely and correctly positioned in the extraction bridge frame
when reassembling.
)
The filter cassettes are held in their correct positions by the guide pins. It is important that the
entire filter cassette (wire mesh filter and flame protection filter) is inserted correctly.
– Remove the wire mesh filter from the flame protection filter frame on one side.
When inserting filters, make sure that the opening in the frame is always facing upwards.
– Insert the filter cassettes in a row (starting from the left or right).
– Replace the lid, so that it locks into position.
The filter cassette is inserted correctly if:
– the opening of the cassette frame is facing upwards.
– the filter cassettes are inserted positively.
– the filter cassette flame protection filter faces toward the induction hob and the wire mesh
filter points upwards.
L
You first need to remove the customer side air baffle before cleaning the induction hob niche
thoroughly.
Removing and cleaning the air baffle
9
Pots and pans removed from the induction hob and external units disconnected from the
power supply
9
All objects removed from unit lid
9
Unit disconnected from the power supply
– Remove customer-side air baffle by lifting upwards.
– Clean air baffle using the cleaning methods and cleaning agents described above.
Installing the splash guard and air baffle
)
Proper operation of the unit is only guaranteed when the customer-side air baffle is installed
correctly.
– Re-insert air baffle from above.
73
Advertisement
Table of Contents
