COOK I-flex
OPERATING INSTRUCTIONS
Attaching/removing
customer-side front
panelling
60
Undo and remove the top fastening screw (2) on both sides while a second person holds the
attachment.
Remove attachment and put to one side if you are not going to use it. Re-insert removed
hexagon socket screws into the threaded holes in the underframe and fasten.
Remove hexagon socket screws from the required position to mount the attachment.
Screw the top fastening hexagon socket screw (2) on both sides while a second person
holds the attachment in the right position.
Fold up attachment and then screw the lower fastening hexagon socket screw (1) into positi-
on on both sides.
The front panelling on the customer side can be easily replaced and can be attached or re-
L
moved without any tools.
1
2
Push customer-side front panelling (1) under the top cover panel.
2
1
3