Table of Contents
Advertisement
COOK I-flex
OPERATING INSTRUCTIONS
Opening/closing drawers
Eutectic plate (coolant
accumulator)
– Hang the two suspension brackets (2) onto the projecting screws on the right and left of the
underframe (3).
L
The operator-side drawers are easy to open and close thanks to their push-to-open and
push-to-close design.
Caution!
Risk of extremities being crushed or caught
Limbs may become trapped in closing drawers.
– Ensure that extremities such as hands do not get caught.
The eutectic plate can only be inserted or removed when the drawer is open. Guide rails are
visible when the optional drawer is open. This is where the section to insert the eutectic plate is
located.
)
The eutectic plate may only be used to keep food cold.
)
Protection such as gloves must be worn when handling pre-cooled eutectic plates.
)
Leaking eutectic plates must not be used to cool food.
)
The eutectic plate has not reached its full cooling capacity until it is completely frozen.
Warning!
Material damage
There is a risk that the plate will deform and leak while it is being heated. The eutectic plate may
burst in extreme cases.
– Do not store or heat the eutectic plate in a heating compartment.
– Dispose of leaking plates immediately. Do not pour liquid into the waste water system. Dispo-
se of contaminated foods immediately.
Warning!
Material damage
The eutectic plate is sensitive to impacts when frosted and can become damaged/leak.
– Do not drop or strike eutectic plate when it is frosted.
61
Advertisement
Table of Contents
