Transport - B.Pro COOK I-FLEX 1 Translation Of The Original Operating Instructions

COOK I-flex OPERATING INSTRUCTIONS

Transport

Warning!
Damage and personal injury
If containers with explosive materials are stored in the unit and the unit is put into operation, this
may cause an explosion and subsequent injury and damage to property.
– Do not store any explosive materials, such as aerosols with flammable propellant, in the unit.
Warning signs
The following warning signs are mounted to the unit:
Warning sign Meaning – Mounting position
"Disconnect mains plug before opening" sticker in compliance with
DIN EN ISO 7010 on the odour filter box top surface
"Spraying with water prohibited" sticker in compliance with
DIN 4844-2 on the fan insert sheet in the odour filter box
"Maximum load capacity" on the extraction bridge lid and on the tray
xx
slide (optional)
kg
"Electrical bonding" in compliance with IEC 60417 on the unit lower
section to the right on operator side, directly next to the electrical
bonding connection
"Warning high voltage" in compliance with DIN 4844-2 on the
ION TEC filter and on the right-hand side of the underframe, next to
the rating plate
"Warning of non-ionising radiation" in compliance with ISO 7010
in centre, behind the air baffle.
Replace any illegible, damaged or missing warning signs immediately.
Upright transport position
Transport the unit in an upright position only.
Transport with a truck or delivery vehicle
The unit may only be transported in a truck or delivery vehicle which features a loading ramp.
The loading ramp must not exceed an angle of inclination of 15°.
13