Table of Contents
Advertisement
COOK I-flex
OPERATING INSTRUCTIONS
Starting/ending
extraction mode
48
Service
This menu is designed for the following authorised service points only:
•
In-house, B.PRO-trained professionals
•
External, B.PRO-trained customer service
•
B.PRO service
)
This menu can only be opened by entering a four-digit PIN.
L
When extraction is put into use for the first time, small, loose activated charcoal particles are
blown out of the charcoal filter pad and into the extracted air from the unit for a short time.
These settle on the floor below the odour filter box. This behaviour may happen again after
the unit is transported.
Caution!
Possible impairment of food quality
The quality of the food located in the unit may be impaired by a power failure, unit malfunctions
or other interruptions.
– Check whether the food quality has been impaired after the core temperature has dropped.
Dispose of food if necessary.
Switching on extraction
9
Unit connected to the power supply
– Switch on the unit at the "Unit On/Off" button and then start the extraction mode by selecting
the corresponding fan power setting.
The respective function display on the "Units On/Off" and "Fan power setting" icons.
Selecting extraction power step
The extraction function has 3 power steps:
•
1 = weakest power step
•
2 = medium power step
•
3 = strongest power step
– Use the "Fan power setting" button 1, 2 or 3 to select the required power step.
The indicator lights up on the selected "Fan power setting" button.
Switching off extraction
– Press "Switch off fan" button.
Extraction mode stops. The function indicator on the "Fan power setting" button goes out.
Advertisement
Table of Contents
