Folding Down The Attachment; Re-Mounting Attachments - B.Pro COOK I-FLEX 1 Translation Of The Original Operating Instructions

COOK I-flex OPERATING INSTRUCTIONS
Folding down the
attachment
Re-mounting
attachments
– Now pull the attachment at an upward angle away from the unit until the two latching devices
disengage.
– Fold down the attachment.
L Tray slides, plate slides and shelves can be moved 10 cm downwards in height or attached
to the opposite side.
Warning!
Crush hazard for extremities
There is a risk of crushing limbs when tray slides are swung up or down and when the bracket is
mounted and it is secured with the mini-catch.
– Take care to ensure no limbs are caught or crushed when folding trays slides are swung up
and down.
Caution!
Risk of injury or damage to attachment
The attachment may drop onto the floor when its hexagon socket screws are undone, possibly
causing injury or damage.
– Use a second person to hold the attachment to prevent it dropping to the floor before undo-
ing the top hexagon socket screws.
Caution!
Risk of injury due to inadequate fastening
Tray slides, plate slides and shelves must always be fastened on both sides with the two hexa-
gon socket screws provided to ensure the necessary load-bearing capacity is achieved.
– Fasten both brackets with two hexagon socket screws each when re-mounting.
– Use a hex key to undo and remove the lower hexagon socket screw (1) from the attachment
fastening on both sides.
– Fold down the attachment.
59