Making Settings On The Display - B.Pro COOK I-FLEX 1 Translation Of The Original Operating Instructions

COOK I-flex OPERATING INSTRUCTIONS
Making settings on the
display
9
Unit connected to mains supply and switched on.
If the unit is connected to the power supply, the On/Off button LED will flash on the B.PRO Con-
trol control electronics.
– Press the OK button for three seconds to activate the settings menu.
One of the following main menus appears on the display:
– Language
– Date/Time
– Filter settings
– Fan settings
– Quick start
– Operating hours
– Service (for B.PRO service employees only)
– Use the control buttons ("Left/Right") to scroll through the menu options.
– Press the OK button to confirm the menu selection.
– Press on the "Back" button briefly to return one step.
Setting the language
– Select the "Language" main menu.
– Press the OK button to confirm.
– Use the control buttons ("Left/Right") to select the required language.
– Press the OK button to confirm.
Setting the date/time
– Select the "Date/Time" main menu.
– Press the OK button to confirm.
The date will be shown in the top display line. The time (24-hour format) is displayed on the lower
display line. The input block flashes on the display. Press OK button to jump to the next input
block.
– Use the control buttons ("Left/Right") to set each input block (day/month/year and hours/
minutes) individually.
– Press the OK button to confirm each input block.
The cursor jumps to the next input block.
)
The date and time are displayed when you exit the settings menu (by pressing on the "Back"
button) during operation and in standby mode.
45