Table of Contents
Advertisement
COOK I-flex
OPERATING INSTRUCTIONS
Folding up and locking
attachment into position
58
Caution!
Material damage
Under no circumstances may you use a forklift when transferring the unit onto a pallet or remo-
ving it from a pallet. The underframe can become damaged and cause considerable damage.
– Always use suitable protective equipment such as protective gloves.
– Ensure you use several people to load the unit onto the pallet or unload it from the pallet.
– Observe the relevant industrial safety regulations and information sheets and national regula-
tions in their current version.
– First check whether the unit can be safely pushed over the ramp, recess or sloped surface.
– Pots, pans and other items may fall from the induction hob and other storage surfaces since
they may slide off the unit.
– Carefully push the unit over the ramp, recess or slanted surface with 2 people (one at each
end of the unit).
Warning!
Danger from overloading
Overloading can lead to the tray slide folding down suddenly. Objects placed on it can result in
damage and injuries if they fall off.
– Load the tray slide with a maximum surface load of 25 kg.
– Lift the attachment until it is about 30° above the horizontal.
– Now push the attachment towards the unit at a downward angle and let it engage into the
two side locks.
– Check once more to ensure that the attachment is properly latched into position in the two
locks and adjust if necessary.
Advertisement
Table of Contents
