Table of Contents
Advertisement
COOK I-flex
OPERATING INSTRUCTIONS
Preparing assembly
Selecting location
Setting up the unit
Assembly
9
Protective film removed from unit
9
There are no signs of defects or visible damage to the unit
9
Mains connection provided by customer matches the value specified on rating plate
)
Observe the following points when selecting where to place the unit to ensure that it can ope-
rate to optimum effect:
– Operate the unit far away from equipment which emits large amounts of steam, such as a
dishwasher.
– Protect the unit adequately from draughts.
)
You can ensure that units are stable in their position if you observe the following points:
– The designated space for the unit is flat and guarantees that the unit is level when installed.
– Lock castor brakes on castor models.
– If the unit has the optional adjustable feet, straighten out the unit to ensure that it is hori-
zontal and stable and it doesn't wobble.
– Ensure that unit is stable in its designated space.
ª
Section "Moving the unit to a new location"
ª
Section "Traversing ramps, recesses, inclined surfaces"
Unit model with castor brakes
Caution!
Risk of extremities being crushed or caught
Extremities can be crushed and people injured when modules are pushed together. If the unit is
heavy, you may not be able to apply the brakes quickly enough if you push the unit with just one
hand.
– Always push the unit with both hands on the top surface.
– Be careful not to pinch your hands between the unit and walls or other objects, such as
cabinets.
31
Advertisement
Table of Contents
