Standard Model - B.Pro COOK I-FLEX 1 Translation Of The Original Operating Instructions

COOK I-flex OPERATING INSTRUCTIONS

Standard model

8
The two-part lid on the extraction bridge closes off the extraction bridge and exhaust duct. It is
removable and provides a large storage surface.
The lid can be optionally provided with a stainless steel railing.
LED lighting for the cooking zones is installed beneath the extraction bridge.
The COOK I-flex is supplied with a permanently built-in induction hob. Depending on the model,
this contains a single induction cooking zone (on the left- or right-hand operator side for the single
model), two induction cooking zones (for the dual model) or three induction cooking zones (for the
triple model). Each zone holds a GN 1/1 container.
There is an open usable space beneath the permanently built-in induction hob with L-profile guide
rails, which can be used to hold pots and pans or cooking inserts. A closed drawer unit can be
incorporated as an option.
The unit underframe is available in different colour combinations and surfaces.
An ingenious system with a front air stream and an operator-side air conductor glass made of
tempered safety glass ensures fume extraction is channelled away.
The COOK I-flex chassis comprises four steering castors 75 mm in diameter, two of which have
castor brakes.
Depending on the model, the unit is fitted with a 230 V or 400 V connected load.
Handling and operation
The COOK I-flex extracts grease, moisture and annoying odours during cooking or while food is
being kept hot, then filters the extracted air and blows it out from beneath the unit.
The B.PRO Control control electronics are located on the left-hand exhaust duct and can be
used to select all extraction functions. The induction cooking zones are controlled using their
respective operating unit.
The unit has a temperature sensor that is triggered for safety reasons when the temperature in
the exhaust ducts exceeds +60 °C. This automatically switches off extraction and the induction
hob.
The standard COOK I-flex model includes:
• Mount consisting of an extraction bridge with integrated filter cassettes (comprising a flame
protection filter and wire mesh filter), exhaust duct and the B.PRO Control control electronics
• Sneeze guard made of tempered safety glass; can be swung up for cleaning
• LED lighting to illuminate the hob