Plugging The Unit Into A Socket Outlet - B.Pro COOK I-FLEX 1 Translation Of The Original Operating Instructions

COOK I-flex OPERATING INSTRUCTIONS
Plugging the unit into a
socket outlet
B
C
Spacing B: ≥ 100 mm to ensure maximum extraction performance
Spacing C: ≥ 1400 mm to ensure maximum extraction performance
– Move the unit into its designated location and lock the castor brakes.
ª
Section "Moving the unit to a new location"
)
The unit lower surface contains a connection for electrical bonding. Regulations in particular
countries require units that will be operated together to be connected via the electrical bon-
ding.
9
The unit is switched off.
Danger!
Risk of an electric shock
A short-circuit in an external unit connected to the main unit (e.g. due to overheating in the mains
supply lead) can cause an electric shock if you come into contact with the main unit.
– Only connect unit to a mains socket outlet equipped with a residual-current device (RCD)/
residual-current circuit breaker, each phase with max. 16 A.
Caution!
Damage to the unit electrical system
The unit electrical system may suffer damage if the unit is not designed for the available mains
voltage or frequency.
– Before connecting, make sure that the mains voltage and frequency on the rating plate corre-
spond with those for the mains socket outlet.
C
B
41