Installation
17.2
The NAC module (1A/2B) FCI2011-U1 is installed on the periphery board as shown
and screwed onto the back box. Slot X901 is also used for the releasing module.
1
Periphery board (252p) or periphery board (504p)
2
Threaded sleeves on back box
3
NAC module (1A/2B) FCI2011-U1
1.
2.
3.
Siemens Industry, Inc.
Building Technologies Division
Installing the NAC module on the periphery board
Plug the NAC module (3) into slot X901 on the periphery board as shown.
Fasten the NAC module to the threaded sleeves (2) in the back box using the
two fixing screws (4).
Wire up the NAC module according to the pin assignment.
FS20 Marine Fire Detection Control Panel
4
2x fixing screw
X901
Slot in periphery board
X5
Connection terminal on NAC module (1A/2B)
93
A6V10519176_enUS_b