Adjustment Elements - Siemens FC2025 Manual

FS20 Marine Fire Detection Panel Control Panel

Adjustment Elements

6.8
S32: Reset key
The 'S32' button has multiple functions depending on how long it is pressed and
whether it is pressed with combinations of other buttons.
Operation
Press for <2 s
Press for >2 s
Press S32 + 'Reset' or
'Acknowledge' (front operating
buttons) at the same time
Restore factory settings
Restoring factory setting will remove all configurations, it is recommended to save the
configuration data before restoring the factory setting.
Operation
Press S32 + 'Reset' (front
operating button) for > 2 s at
the same time
36
Siemens Industry, Inc.
Building Technologies Division
Function
Panel is shut down and restarted in a controlled manner. This
procedure takes up to five minutes.
Panel is shut down and restarted immediately. This may lead
to data loss. This procedure takes up to two minutes.
Restore factory settings or update firmware.
Function
Panel is started in Restore factory settings mode.
A short beeping sound confirms the function is being executed.
A6V10519176_enUS_b