Laying And Connecting The Mains Cable For The Power Supply (170 W) - Siemens FC2025 Manual

FS20 Marine Fire Detection Control Panel
Laying and Connecting the Mains Cable for the Power
8.1
Supply (170 W)
Mains cable wiring for the power supply (170W)
WARNING
Danger of Electric Shock
Before feeding in and laying the mains cable, disconnect it from the power supply. Secure the mains
connection against inadvertently being switched on.
42
Siemens Industry, Inc.
Building Technologies Division
1 Secondary output slot or connection cable for
periphery board
2 Power supply (170W) FP2011-U1
3 Primary input screw terminal
4 Back box ground connection
H 'Hot' connection (black)
N "Neutral' connection (white)
G 'Ground' connection (green)
* See following section for installation of the EMI Filter
A6V10519176_enUS_b