Standards And Directives Complied; Fcc Statement - Siemens FC2025 Manual

Disregard of the Safety Regulations
Siemens products are tested before delivery to ensure they function correctly when used properly.
Siemens disclaims all liability for damage or injuries caused by the incorrect application of the
instructions or the disregard of danger warnings contained in the documentation. This applies in
particular to the following damage:
Personal injuries or damage to property caused by improper use and incorrect application

Personal injuries or damage to property caused by disregarding safety instructions in this

documentation or on the product
Personal injury or damage to property caused by poor maintenance or lack of maintenance


Standards and Directives Complied

2.3
A list of the standards and directives complied with is available from your Siemens representative.

FCC Statement

2.4
WARNING
Installation and usage of equipment is not in accordance with instructions manual
Radiation of radio frequency energy
Interference to radio communications
● Install and use equipment in accordance with instructions manual.
● Read the following information.
The equipment generates, uses, and can radiate radio frequency energy, if not installed and used
in accordance with the instructions manual, may cause interference to radio communications.
It has been tested and found to comply with the limits for a Class A computing device pursuant to
Part 15 of FCC Rules, which are designed to provide reasonable protection against such
interference when operated in a commercial environment.
Operation of this equipment in a residential area is likely to cause interference in which case the
user at their expense will be required to take whatever measures may be required to correct the
interference.
Siemens Industry, Inc.
Building Technologies Division
FS20 Marine Fire Detection Control Panel
17
A6V10519176_enUS_b