Configuring Safedlink Interface -Fn2001-U1 - Siemens FC2025 Manual

15.5.2 Configuring SAFEDLINK Interface -FN2001-U1

From the Engineering Tool, create an 'SAFEDLINK interface (FN2001)' element.
Siemens Industry, Inc.
Building Technologies Division
Wiring For Class B Network
View of wiring for class B SAFEDLINK network
Ground fault detected at <1 kΩ

Power limited accessory to NFPA 70 / NEC 760

No EOL required

Connect shields at one end only

Max. length of SAFEDLINK wiring between two modules:

– 3300 ft or 10 dB loss at 100 kHz
– 3300 ft or 30 dB loss at 1 MHz
All wiring is supervised for open circuits and short-circuits

Creating SAFEDLINK interface
1. Select the 'Hardware' task card.
2. Open the 'Panel' in the tree view.
3. Highlight the 'CPU (FCC20xx)' element.
4. Open the 'New element' window.
5. Select 'SAFEDLINK interface (FN2001)' in the 'Type:' field.
6. Click 'Add'.
 The 'SAFEDLINK interface (FN2001)' element is created.
FS20 Marine Fire Detection Control Panel
83
A6V10519176_enUS_b