Power Supply Location - Siemens FC2025 Manual

FS20 Marine Fire Detection Control Panel

Power Supply Location

7.2
WARNING
Electrical Voltage
Electric Shock
●
●
●
●
●
●
●
40
Siemens Industry, Inc.
Building Technologies Division
Before feeding in and laying the mains cable, disconnect it from the power supply.
Secure the mains connection against inadvertently being switched on.
The mains cable must be fed in at the side from below.
The mains connection must be placed along the right side of the enclosure (no EMC zone).
Signal and control circuits must only be fed into the enclosure on the left or from above.
Batteries must be installed so that they cannot leak.
No cable openings should be made in the base of the enclosure, unless an additional
enclosure is mounted below the panel to accommodate the batteries.
1 Batteries (BP-62)
2 Battery Bracket
3 AC Terminal Block
4 EMI Filter
5 FP2011-U1 Power
Supply
A6V10519176_enUS_b