Roland VR-6HD Reference Manual page 98

Menu List
VIDEO OUTPUT
Menu item Value (bold text: default value)
VIDEO OUT 1–3 Adjusts the video that is output from the VIDEO OUT 1–3 connectors.
OUTPUT STATUS —
YPbPr
COLOR SPACE
(0–255), RGB (16–235)
DVI-D/HDMI SIGNAL HDMI, DVI-D
EXTERNAL REC
OFF, ON
CONTROL
BRIGHTNESS -64–0–63
CONTRAST -64–0–63
SATURATION -64–0–63
RED -64–0–63
GREEN -64–0–63
BLUE -64–0–63
Adjusts the video that is output from the USB STREAM connector.
USB OUT
* You can edit the USB output video format and compression method from the livestreaming app or other app used at the output destination.
OUTPUT STATUS
—
Sets the output destination formats that can be selected from the livestreaming app.
YUY2 & MJPEG
OUTPUT FORMAT
YUY2
CONNECTION RESET EXEC
FREEZE
Menu item
FREEZE
TYPE
VIDEO 1–6 (*4)
(*4) This can be set if "TYPE" is "SELECT".
98
Explanation
Shows the format and an HDCP signal presence. If there is no connection, "NOT CONNECTED"
is shown.
(4:4:4), YPbPr (4:2:2), RGB
Specifies the color space.
Specifies the type of output signal.
Turns the External Rec control on/off. When this is "ON", REC START/STOP commands can be
sent to a recorder that supports REC control functionality.
* To use the external REC control function, you must assign the video recording start/stop functions to a
USER button on the dashboard.
Adjusts the brightness.
Adjusts the contrast.
Adjusts the saturation.
Adjusts the red level.
Adjusts the green level.
Adjusts the blue level.
Indicates whether the connection uses USB 2.0 (HIGH SPEED) or USB 3.0 (SUPER SPEED).
If not connected to a computer, this indicates "NOT CONNECTED".
* When "HDCP" in the SYSTEM menu is "ON", "HDCP MASKED" is displayed, and video/audio is not
outputted from the USB STREAM connector.
YUY2 and Motion JPEG are selectable.
Only YUY2 is selectable.
Reconnects the computer and the VR-6HD when the video is garbled or when operation is
otherwise unstable.
Value (bold text: default
Explanation
value)
OFF, ON Turns the freeze function on/off. When this is "ON", the input video is temporarily frozen.
Specifies the operation mode for freezes.
ALL Freezes all video that is being input.
SELECT Freezes only the specified input video.
For each input, specifies whether the freeze function is enabled (ENABLE) or disabled
ENABLE
DISABLE,
(DISABLE).