15: System - Roland VR-6HD Reference Manual

Menu List

15: SYSTEM

Menu item
DATE&TIME
Bluetooth
HDCP (*1)
SYSTEM FORMAT (*1)
VIDEO OUT 1–3
USB OUT
STREAM/RECORD
FRAME RATE (*1)
USB OUT (*1)
STREAM/RECORD (*1)
PANEL OPERATION
EFFECTS TRANSITION
SYNC
EFFECTS SPOT
AUDIO FADER/KNOB MODE
(*1) A change in the setting is not applied until you press the [VALUE] knob to confirm.
138
Value (bold text: default
Explanation
value)
Menu item
Value
Selects how the time is set.
CONFIGURE MANUAL
USING NTP
TIME ZONE
–
Month/Day/Year
DATE FORMAT Day/Month/Year
Year/Month/Day
CLOCK TYPE ANALOG, DIGITAL
NTP SERVER –
Menu item Value
OFF, ON
Bluetooth
PAIRING EXEC
Displays the Bluetooth connection status.
OFF
STATUS PAIRING MODE
NOT CONNECTED
CONNECTED
Specifies whether HDCP is enabled (ON) or disabled (OFF).
OFF Copy-protected (HDCP) video cannot be input.
Copy-protected (HDCP) video can be input. HDCP is also added to the video that is output.
ON
* Video/audio from the USB STREAM connector is not outputted.
1080p, 720p
Specifies the system format. The output format is the same as the system format.
1080p, 1080i, 720p
Sets the output format for the VIDEO OUT 1–3 connectors.
1080p, 720p Specifies the output format of the USB STREAM connector.
1080p, 720p Specifies the output format of the DIRECT STREAM port.
60, 59 .94, 50, 30, 29.97, 25,
Specifies the frame rate.
24, 23.98Hz
30, 60Hz
Specifies the frame rate of the USB STREAM connector.
29.97, 59 .94Hz
* The value differs depending on the "FRAME RATE" setting.
25, 50Hz
30, 60Hz
Specifies the frame rate of the DIRECT STREAM port.
29 .97, 59.94Hz
* The value differs depending on the "FRAME RATE" setting.
25, 50Hz
Specifies the operation mode for video transitions.
DISSOLVE This mode selects the video to output and immediately outputs it to the PGM bus.
In this mode, the PST video is displayed in the PVW bus, and you can check the video before
PGM/PST
outputting it to the PGM bus.
Sets whether the PinP/DSK composites are switched on and off in tandem with the video
transitions.
OFF, ON
When this is "ON", the PinP/DSK composition turn on/off in tandem with the video transitions.
The composited result that is previewed is sent to final output when transitioning to a
different video.
Specifies whether the spot function for the [PVW] and [PGM] buttons is enabled (ENABLE) or
disabled (DISABLE).
ENABLE
DISABLE,
With the spot function, long-pressing the [PVW] or [PGM] button for each layer shows only
the layer that is targeted for the operation while the button is pressed.
When a fader or knob is operated, if the position of the fader or knob does not match the
value of the parameter, the operation is ignored until the position matches the parameter's
CATCH
value.
* The [SETUP] button blinks while the fader operations are being ignored. The closer the fader or knob
position gets to the parameter's value, the faster the button blinks.
The value of the parameter in question immediately changes to match the position of the
DIRECT
fader or knob when you operate them.
Explanation
The time is set manually.
The time is set by retrieving the time from an NTP server.
Sets the time zone.
Sets the format used for displaying the date.
Sets the type of time display used.
Specifies the default NTP server.
Explanation
Turns the Bluetooth function on/off.
Begins pairing with a Bluetooth device.
Bluetooth off
Now pairing
Waiting for connection
Connected