Roland VR-6HD Reference Manual page 70

Other Functions
Editing a macro
You can edit the contents of a function, change the order in which it is
executed, or copy/delete a function either while creating a macro or after
the macro is finished.
Editing the contents of a function
1 .
Using step 4 in "Recording a Macro" (p. 69), touch the line
you want to edit from the operation list.
A popup menu appears.
2 .
Touch <EDIT FUNCTION>.
The EDIT FUNCTION menu appears.
Menu Value
PGM TAKE
PGM/PST
SELECT
AUX SELECT
INPUT ASSIGN
FUNCTION
TRANSITION
TIME
TRANSITION
TYPE
PinP & KEY ON/
OFF
3 .
Follow steps 5–9 in "Recording a Macro" (p. 69) to edit the
operation.
Copying a function
* Copying is disabled if the number of recorded functions have reached
the limit (10).
1 .
Using step 4 in "Recording a Macro" (p. 69), touch the line
you want to copy from the operation list.
A popup menu appears.
2 .
Touch <DUPLICATE>.
The copied operation is added to the last line of the list.
70
Explanation
PinP & KEY Sets the operation
to record to the
SOURCE
macro.
PinP & KEY
* The related menu is
WINDOW
shown according to the
PinP & KEY
operation you set.
CROPPING
WAIT:
PinP & KEY VIEW
Sets the waiting
DSK ON/OFF
time before the
DSK SOURCE
next operation is
SPLIT TYPE
executed.
Moving a function
1 .
Using step 4 in "Recording a Macro" (p. 69), touch the line
you want to move from the operation list.
A popup menu appears.
2 .
Touch <MOVE>.
3 .
A green cursor is shown to indicate the move destination.
Use the [VALUE] knob to specify the move destination, and
press the [VALUE] knob.
This moves the line.
Deleting a function
1 .
Using step 4 in "Recording a Macro" (p. 69), touch the line
you want to delete from the operation list.
A popup menu appears.
2 .
Touch <DELETE>.
This deletes the operation line.
MEMO
What's the difference between "PREVIEW" and "EXECUTE"?
When you touch <PREVIEW> or <EXECUTE> at the bottom of the edit
screen, this executes the macro. With "PREVIEW", the action reverts to
the previous state once it is executed; but with "EXECUTE", the results
are reflected and remain in PROGRAM OUT.