9: Still Image - Roland VR-6HD Reference Manual

9: STILL IMAGE

Menu item
LOAD FROM STORAGE
STILL IMAGE
LOAD
SAVE TO STORAGE
STILL IMAGE
SAVE
SAVE TO INTERNAL STORAGE
DELETE STILL IMAGE
DELETE ALL STILL IMAGE
Value (bold text:
Explanation
default value)
This loads a still image from the storage media.
Specifies where to save still images imported from a storage to this unit's internal memory.
STILL 1–16
Shows a list of still image files on the storage media.
Select still images in the list to load them from the storage media.
Formats supported for loading
Format
ENTER
Resolution
File name
This exports a still image to storage media.
Selects the still images to export to the USB flash drive.
Press the [VALUE] knob to display a list of still images stored on the storage media (in the "Still"
subdirectory).
STILL 1–16
* The file formats of the still images that can be saved are the same as in "Formats supported for loading",
above.
* You can't export still images that were created while "HDCP" in the SYSTEM menu was "ON".
Shows a list of still image files on the storage media.
ENTER
Select still images in the list to export them to the storage media.
You can set the method of saving still images to "temporarily save". When you turn off the
ENABLE, DISABLE
power while the status is "DISABLE", the captured still image is deleted.
EXEC Delete the selected still image.
EXEC Delete all still images.
Bitmap file (.bmp), 24-bit color, uncompressed
PNG file (.png), 24-bit color
* Alpha channel supported
JPEG file (.jpg), 24-bit color
In conformity with system format
No more than 64 single-byte alphanumeric characters
* The extension ".bmp", ".png", ".jpg", or ".jpeg" must be added.
Menu List
129