8: Memory/Macro/Seq - Roland VR-6HD Reference Manual

8: MEMORY/MACRO/SEQ

SCENE MEMORY
Value (bold text: default
Menu item
value)
Specifies the settings loaded at startup.
LAST MEMORY
START UP
1: MEMORY 1–
32: MEMORY 32 (*1)
MEMORY, PANEL
PRIORITY
MEMORY PROTECT OFF, ON
LOAD FROM STORAGE
ENTER
SAVE TO STORAGE
ENTER
BUTTON ASSIGN ENTER
1: MEMORY 1–
32: MEMORY 32 (*1)
The default values are as
follows.
1:
VIDEO SWITCHER BUTTON
2:
1–6
3:
4:
5:
6:
FADE TIME 0 .0–4.0sec
MIX/WIPE OFF,
PinP & KEY 1–2 OFF,
DSK OFF,
Specifies whether to recall the following items when recalling a scene memory.
LOAD PARAMETERS
Items that are turned off are excluded from the preset memories that are recalled.
VIDEO ASSIGN
OFF,
VIDEO INPUT OFF,
VIDEO OUTPUT
OFF,
TRANSITION TRANSITION settings
TRANSITION TYPE
OFF,
MIX OFF,
WIPE
OFF,
SPLIT OFF,
PinP & KEY PinP & KEY settings
PinP & KEY 1 OFF,
PinP & KEY 2 OFF,
DSK DSK settings
DSK OFF,
VIDEO SWITCHER
OFF,
BUTTON
AUDIO FADER ASSIGN OFF, ON
AUDIO INPUT OFF, ON
OFF, ON
AUDIO OUTPUT
AUDIO FOLLOW OFF, ON
OFF, ON
AUDIO AUTO MIXING
(*1) If you edited a scene memory's name using "NAME EDIT", the edited name is shown.
Explanation
Restores the state that was in effect immediately before the power was turned off (Last Memory
feature).
The current settings (Last Memory values) are saved every 4 seconds, and when you exit a menu.
Recall the settings at the selected scene memory.
Sets whether to give the scene memory or the panel state priority.
When this is "ON", prohibits settings from being saved or initialized. This protects the scene
memories.
* Protected scene memories are erased if you perform a factory reset.
Shows a list of scene memory setting files on the storage media.
You can select a scene memory setting file to recall a scene memory (1–32) on this unit.
Shows a list of scene memory setting files on the storage media.
You can select a scene memory setting file to save a scene memory (1–32) to the storage media.
This shows the BUTTON ASSIGN menu.
MEMORY 1
Selects the scene memories that are assigned to the VIDEO SWITCHER buttons.
MEMORY 2
MEMORY 3
MEMORY 4
MEMORY 5
MEMORY 6
Sets how long the transition to the next video takes when recalling a scene memory.
* The time you set is used for the parameters below.
ON When this is "ON", the transition effect is applied when the scene memory is recalled.
When this is "ON", the inset screen fades in when you recall a scene memory that includes a PinP
ON
composite.
When this is "ON", the superimposed caption and video fades in when you recall a scene memory
ON
that includes a DSK composite.
ON
VIDEO ASSIGN menu
ON VIDEO INPUT menu
ON
VIDEO OUTPUT menu
ON
TRANSITION menu
ON MIX menu
ON
WIPE menu
ON
SPLIT menu
ON PinP & KEY 1 menu
ON
PinP & KEY 2 menu
ON
DSK menu
ON
VIDEO SWITCHER button state
AUDIO FADER ASSIGN menu
AUDIO INPUT menu
AUDIO OUTPUT menu
AUDIO FOLLOW menu
AUDIO AUTO MIXING menu
Menu List
127