Äremotely Controlling The Vr-6Hd - Roland VR-6HD Reference Manual

Remotely Controlling the VR-6HD
To remotely control the VR-6HD, you can use an external device to send control signals to the unit (p. 90), use a dedicated app, or use LAN/RS-232
commands.
Using the dedicated apps "VR-6HD RCS" and "VR-6HD
Remote"
Dedicated apps are available for computers ("VR-6HD RCS") and for the
iPad ("VR-6HD Remote").
These apps can be downloaded from the Roland website.
https://proav .roland .com/
* For details on operation, refer to the Owner's Manual of "VR-6HD RCS"
or "VR-6HD Remote".
VR-6HD RCS
(Windows/Mac)
Use the dedicated "VR-6HD RCS" app to operate the VR-6HD from your
computer.
You can connect either wirelessly or via cable.
Wireless connection
¹ Connection via wireless LAN master device (Wi-Fi)
Wired connection (via cable)
¹ USB connection (USB Type-C cable)
¹ LAN connection (LAN cable)
¹ RS-232 connection (RS-232 cable)
LAN connection
USB, RS-232, or LAN connection
VR-6HD Remote
Use the dedicated "VR-6HD Remote" app to operate the VR-6HD from
your iPad.
You can connect either wirelessly or via cable.
Wireless connection
¹ Bluetooth connection
¹ Connection via wireless LAN master device (Wi-Fi)
Wired connection (via cable)
USB connection (USB Type-C cable, Lightning to USB camera adapter)
LAN connection
VR-6HD
RCS
Computer
VR-6HD
Remote
USB connection
iPad
Bluetooth connection
LAN/RS-232 command
The VR-6HD support two types of remote-interface communication: LAN
and RS-232.
Using the DIRECT STREAM port or RS-232 connector to send specific
commands to the VR-6HD from a controlling device lets you operate the
VR-6HD.
See "Remote Control Guide" (PDF) for details on each interface and for a
list of LAN/RS-232 commands.
https://proav .roland .com/manuals/
MEMO
MIDI implementation
The VR-6HD supports MIDI remote control.
See "MIDI Implementation" in the "Remote Control Guide" (PDF) for
details.
Other Functions
95