Initializing All Macros - Roland VR-6HD Reference Manual

Loading
Here's how to load the macro settings that are saved on a storage.
Loading the settings overwrites the current settings for the macros
(1–100).
1 .
Insert the SD card into the SDXC card slot.
* When using a USB flash drive, connect the USB flash drive to the USB
HOST port.
Ó
2 .
[MENU] button "MEMORY/MACRO/SEQ"
"MACRO", and press the [VALUE] knob.
The macro screen appears.
3 .
Touch <SETUP>.
The setup screen appears.
4 .
Use the [VALUE] knob to select "LOAD FROM STORAGE", and
press the [VALUE] knob.
The macro setting files in the storage are listed.
* Use the "SD CARD" or "USB MEMORY" selector at the top of the screen
to switch between the storage media to load from.
5 .
Touch the macro settings file that you want to recall.
A confirmation message appears.
* If you decide to cancel, press the [EXIT] button.
6 .
Use the [VALUE] knob to select "OK", and then press the
[VALUE] knob.
The macro settings are loaded. When the operation is finished, the
message "COMPLETED" appears.
7 .
Press the [MENU] button to close the menu.

Initializing All Macros

Here's how to initialize and erase all the macros.
1 .
[MENU] button
"MACRO", and press the [VALUE] knob.
The macro screen appears.
2 .
Touch <SETUP>.
The setup screen appears.
Ó
select
3 .
Use the [VALUE] knob to select "INITIALIZE", and then press
the [VALUE] knob.
A confirmation message appears.
* If you decide to cancel, press the [EXIT] button.
4 .
Use the [VALUE] knob to select "OK", and then press the
[VALUE] knob.
The macros are initialized.
5 .
Press the [MENU] button to close the menu.
Ó
"MEMORY/MACRO/SEQ"
Other Functions
Ó
select
75