Äfreezing The Input Video (Freeze); Setting The Operation Mode; Freezing The Input Video - Roland VR-6HD Reference Manual

Freezing the Input Video (Freeze)
Here's how to temporarily freeze the input video (freeze function).
You can apply transition effects during a video freeze.

Setting the Operation Mode

There are two freeze modes: the "ALL mode" for freezing all input video,
and the "SELECT mode" that freezes only the input video you specify. Set
the mode that matches your needs.
Ó
1 .
[MENU] button "VIDEO"
[VALUE] knob.
The Freeze function setup screen appears.
2 .
Use the [VALUE] knob to select "TYPE", and then press the
[VALUE] knob.
3 .
Use the [VALUE] knob to select the operation mode, and
press the [VALUE] knob.
Value Explanation
ALL Freezes all video that is being input.
SELECT Freezes only the specified input video.
If "SELECT" is selected
4 .
Touch the screen to specify "VIDEO 1" through "VIDEO 6".
Value Explanation
ENABLE The input video freezes.
DISABLE
The input video does not freeze.
5 .
Press the [MENU] button to close the screen.
Ó
select "FREEZE", and press the

Freezing the Input Video

Ó
1 .
[MENU] button "VIDEO"
[VALUE] knob.
The Freeze function setup screen appears.
2 .
Use the [VALUE] knob to select "FREEZE", and then press the
[VALUE] knob.
3 .
Use the [VALUE] knob to select "ON".
The input video freezes.
4 .
To turn the freeze function off, operate the [VALUE] knob
again and select "OFF".
5 .
Press the [MENU] button to close the screen.
MEMO
You can assign the freeze function to a USER button on the
dashboard to turn the function on/off (p. 84).
Video Operations
Ó
select "FREEZE", and press the
31