Roland VR-6HD Reference Manual page 115

Menu item
LOUDNESS AUTO GAIN
CONTROL
INTEGRATED GAIN
CONTROL
SENS
MOMENTARY GAIN
CONTROL
SENS
TARGET LKFS
FORGET LEARNING
ADAPTIVE NOISE REDUCTION
DEPTH
TALKING DETECTOR
AUTO LEARN
MANUAL MEASURE
FORGET LEARNING
LO FREQUENCY CUT
GEQ
ALL FLAT
25 Hz
40Hz
63 Hz
100Hz
160Hz
250Hz
400Hz
630Hz
1kHz
1.6kHz
2.5kHz
4kHz
6.3kHz
10kHz
16kHz
Value (bold text: default
Explanation
value)
Turns loudness auto gain control on/off.
OFF, ON
Effect
Specifies whether the extended interval auto control is enabled (ENABLE) or disabled
ENABLE
DISABLE,
(DISABLE).
0–80–127 Adjusts the speed at which the target level (TARGET LKFS) is approached.
DISABLE, ENABLE Specifies whether the momentary auto control is enabled (ENABLE) or disabled (DISABLE).
0–80–127 Adjusts the speed at which the target level (TARGET LKFS) is approached.
-34–-24–-10dB Specifies the target loudness value.
EXEC Resets the learned parameters.
Turns Adaptive Noise Reduction on/off.
OFF, ON
Effect
0–80–127 Specifies the strength at which noise reduction is applied.
Specifies the sensitivity of the talking detector.
0–80–127
Higher values raise the sensitivity, so that it will be easier to detect the presence or absence
of talking even in a noisy environment.
DISABLE, ENABLE Enables automatic noise detection.
EXEC Performs noise detection manually.
EXEC Resets the learned parameters.
OFF, ON Turns Low Frequency Cut on/off.
These are the settings for the graphic equalizer.
OFF, ON
Effect
ENTER Sets the equalizer settings to flat (0.0 dB).
-15.0–0 .0–15.0dB Boost/cut each frequency region.
The long-term average loudness is measured, and the volume is adjusted so that it is
appropriate overall.
By continuously monitoring the input audio to detect noise during periods of silence, this
removes only the noise component.
It lets you shape the character of the sound by boosting or cutting each of the 15 frequency
regions into which the sound is divided.
Menu List
115