Roland VR-6HD Reference Manual page 23

Input scan
1 .
Select "INPUT SCAN" for the operation mode. (p. 22)
The setup screen changes accordingly.
2 .
Use the [VALUE] knob to select a parameter shown below,
and press the [VALUE] knob.
Parameter
SCAN SEQUENCE
SCAN TRANSITION TIME
SCAN TARGET
INPUT 1–6 TIME
* For details on the parameter, refer to "10: AUTO SWITCHING" (p. 130).
3 .
Use the [VALUE] knob to edit the value of the setting, and
press the [VALUE] knob.
4 .
Press the [MENU] button to close the screen.
Scene memory scan
1 .
Select "SCENE MEMORY SCAN" for the operation mode.
(p. 22)
The setup screen changes accordingly.
2 .
Use the [VALUE] knob to select a parameter shown below,
and press the [VALUE] knob.
Parameter Explanation
Specifies the order in which scene memories
are switched.
NORMAL:
Switches in the order of scene memory 1Ó32.
SCAN SEQUENCE
REVERSE:
Switches in the order of scene memory 32Ó1.
RANDOM:
Switches randomly.
MEMORY 1–32
Specifies the time it takes to switch to the next
TIME scene memory. Turn this "OFF" to skip.
* For details on the parameter, refer to "10: AUTO SWITCHING" (p. 130).
3 .
Use the [VALUE] knob to edit the value of the setting, and
press the [VALUE] knob.
4 .
Press the [MENU] button to close the screen.
Explanation
Specifies the order in which video
signals are shown.
NORMAL:
Switches in the order of INPUT 1
REVERSE:
Switches in the order of INPUT 6
RANDOM:
Switches randomly.
Specifies the video transition time.
Sets the video to which auto switching
is applied.
VIDEO INPUT:
Final output video and preview video
PinP & KEY 1–2:
PinP & KEY layer (inset screen) video
DSK:
DSK layer (inset screen) video
Specifies the time that the video is
shown. Turn this "OFF" to skip.
Beat sync
1 .
Select "BEAT SYNC" for the operation mode. (p. 22)
The setup screen changes accordingly.
2 .
Use the [VALUE] knob to select a parameter shown below,
and press the [VALUE] knob.
Parameter
SYNC SOURCE
Ó
6.
Ó
1.
SCAN SEQUENCE
SCAN TRANSITION
TIME
SCAN CYCLE
SCAN TARGET
* For details on the parameter, refer to "10: AUTO SWITCHING" (p. 130).
3 .
Use the [VALUE] knob to edit the value of the setting, and
press the [VALUE] knob.
4 .
Press the [MENU] button to close the screen.
MEMO
When an auto-switching function is assigned to a USER button on the
dashboard, the USER button blinks in time with the current BPM.
Video Operations
Explanation
Sets the input audio that's synchronized with
the video.
Specifies the order in which video signals are
shown.
NORMAL:
Switches in the order of INPUT 1
REVERSE:
Switches in the order of INPUT 6
RANDOM:
Switches randomly.
Specifies the video transition time.
Sets the beat number on which the video
switches to the next one.
Sets the video to which auto switching is
applied.
VIDEO INPUT:
Final output video and preview video
PinP & KEY 1–2:
PinP & KEY layer (inset screen) video
DSK:
DSK layer (inset screen) video
Ó
6.
Ó
1.
23