Äconnecting Bluetooth; Devices; Registering A Bluetooth Audio Device (Pairing); Connecting An Already-Paired Bluetooth Device - Roland VR-6HD Reference Manual

Panel Descriptions
Connecting Bluetooth
Use the Bluetooth features of the VR-6HD to connect it to your Bluetooth-compatible mobile device. This lets you do the following:
¹ Input the audio signals from your Bluetooth audio device.
¹ Use dedicated app "VR-6HD Remote" to remotely control the VR-6HD from an iPad (p. 95).
* For more on connecting (pairing) with a dedicated app, see the app's Owner's Manual.
* VR-6HD Remote is planned to be updated for compatibility with this unit.

Registering a Bluetooth Audio Device (Pairing)

To connect a Bluetooth device to this unit, you must pair (register) the
device with the unit.
Once you pair the device with this unit, there is no need to do it again.
* To connect a Bluetooth device that's already paired, refer to
"Connecting an Already-Paired Bluetooth Device" on this page.
* See the Owner's Manual for the Bluetooth device you want to pair for
details on the necessary operations.
1 .
Place the Bluetooth device nearby the VR-6HD.
Ó
2 .
[MENU] button "SYSTEM"
"Bluetooth", and press the [VALUE] knob.
3 .
Use the [VALUE] knob to select "ON", and then press the
[VALUE] knob.
The VR-6HD's Bluetooth function turns on.
4 .
Use the [VALUE] knob to select "PAIRING", and press the
[VALUE] knob.
A confirmation message appears.
* If you decide to cancel, press the [EXIT] button.
5 .
Use the [VALUE] knob to select "OK", and then press the
[VALUE] knob.
Pairing begins.
The following message is shown when the unit is pairing.
"NOW PAIRING . . . "
6 .
Turn on the Bluetooth function of the Bluetooth device.
7 .
Display the Bluetooth device screen on your Bluetooth
device, and select "Roland VR-6HD Audio".
Once pairing is successful, the message on the VR-6HD changes to
"COMPLETED".
8 .
Press the [MENU] button to close the menu.
8
®

Devices

Ó Ó
"Bluetooth" select
Connecting an Already-Paired Bluetooth
Device
1 .
Turn on the Bluetooth function of the Bluetooth device.
2 .
Turn on the Bluetooth function of the VR-6HD.
The onscreen STATUS display on the VR-6HD changes to "CONNECTED"
when the connection is successful.
* If connection does not succeed, select "Roland VR-6HD Audio" in the
Bluetooth device screen on your Bluetooth device.
MEMO
¹ You can also check the connection status by looking at the
(Bluetooth) indicator on the MENU screen and on the Bluetooth
settings screen.
Lit Connected
Unlit Bluetooth off
¹ Pair again in the following cases:
– When the pairing data has been deleted from the Bluetooth
device
– When the VR-6HD has been reset to its factory-set state (p.
94)
¹ To remove the Bluetooth connection, deactivate Bluetooth on the
VR-6HD or on your Bluetooth device.
¹ You can assign a function to the dashboard for switching
Bluetooth on/off or for pairing (p. 84).
Rapid
Now pairing
blinking
Waiting for
Blinking
connection