Äusing Smart Tally; Connecting Via A Wireless Lan Router; Starting Smart Tally - Roland VR-6HD Reference Manual

Other Functions
Using Smart Tally
Roland's own Smart Tally system turns your smart device or computer that's connected to the VR-6HD into a tally box. This lets you access your smart device
or computer via a wireless LAN access point to display a tally on that device.

Connecting via a Wireless LAN Router

Connect your Wi-Fi enabled smart device or computer to the wireless LAN
router via Wi-Fi.
* If you connect multiple smart devices or computers, operation might
be slower.
1 .
Use a LAN cable to connect the LAN port on your wireless
LAN master device to the DIRECT STREAM port on the
VR-6HD.
VR-6HDRear Panel
Connect to a LAN port
Do not connect to the internet port
or WAN port.
* The arrangement of ports will
differ depending on the device
you're using.
2 .
Turn on the wireless LAN master device, and connect your
smart device or computer via wireless LAN (Wi-Fi).
Enable the DHCP function of the wireless LAN router.
* For details on how to connect the wireless LAN (Wi-Fi), refer to the
manual of the device that you're using.
3 .
Power-on the VR-6HD.
4 .
From the [MENU] button
to "USING DHCP" and press the [VALUE] knob.
The IP address, subnet mask, and default gateway are obtained
automatically.
5 .
Use the [VALUE] knob to select "NETWORK INFORMATION",
and press the [VALUE] knob.
The NETWORK INFORMATION screen appears.
MEMO
If you fix the IP address, you'll always be able to start Smart Tally with
the same IP address.
For details on how to specify a fixed IP address, refer to the manual of
the wireless LAN router that you're using.
92
LAN cable
Wireless LAN router
Ó
"NETWORK" , set "CONFIGURE"
When "CONNECTION" indicates
"CONNECTED", the connection settings
are complete.

Starting Smart Tally

1 .
From the VR-6HD's [MENU] button
"NETWORK", and press the [VALUE] knob.
The NETWORK INFORMATION screen appears.
2 .
Start a browser on your smart device or computer.
3 .
In the URL input field of your browser, enter the IP address
that's shown in the NETWORK INFORMATION screen to
access the website.
The Smart Tally settings screen appears.
The IP address will differ depending on the device
you're using.
* You can also access the website by scanning a QR code. The QR code
is shown when you press "2D CODE FOR SMART TALLY" on the screen
in step 1.
4 .
In "Channel Status (Tally)", select the video source that you
want to assign to the smart device or computer.
The device's display switches to the tally information screen.
This shows the tally information corresponding to the video source
output from the VR-6HD.
Red: PGM Green: PST
NOTE
¹ Depending on the network conditions, the wireless LAN (Wi-Fi)
communication speed or connection might be unstable, so that
the tally indication is not displayed correctly. In this case, reload
the page.
¹ Depending on the version of the browser that you're using, the
tally indication might not be displayed correctly. Use the latest
version of the browser whenever possible.
Ó Ó
"NETWORK" select
Gray: Not
selected