Roland VR-6HD Reference Manual page 100

Menu List
Menu item Value (bold text: default value)
COMPRESSOR
OFF, ON
THRESHOLD
-50–-8–0dB
1.00:1, 1.12:1, 1.25:1, 1.40:1,
1.60:1, 1.80:1, 2.00:1, 2 .50:1,
RATIO
3.20:1, 4.00:1, 5.60:1, 8.00:1,
16.0:1, INF:1
ATTACK
0–30–100msec
RELEASE
30–250–5000msec
MAKEUP GAIN
-40–0–40dB
EQUALIZER OFF, ON
Hi GAIN
-12.0–0 .0–12.0dB
Hi FREQUENCY
1.00–10 .0–20.0kHz
Hi-Mid GAIN
-12.0–0 .0–12.0dB
Hi-Mid FREQUENCY
20Hz–2 .00kHz–20.0kHz
Hi-Mid Q 0.5–1 .0–16.0
Lo-Mid GAIN -12.0–0 .0–12.0dB
Lo-Mid FREQUENCY 20Hz–500Hz–20.0kHz
Lo-Mid Q 0.5–1 .0–16.0
Lo GAIN
-12.0–0 .0–12.0dB
Lo FREQUENCY
20Hz–100Hz–2.00kHz
VOICE CHANGER OFF, ON
PITCH
-12–+12
FORMANT -10–+4–+10
ROBOT OFF, ON
MIX
0–100
(*1) The [2] fader is disabled when "STEREO LINK" is "ON".
(*2) This can be set if "STEREO LINK" is "OFF".
AUDIO IN 3–6
Adjusts the audio that is input from the AUDIO IN 3 – 6 jacks.
AUDIO IN 3/4 (LINKED),
"AUDIO IN 3/4 (LINKED)" "AUDIO IN 5/6 (LINKED)" is shown when "STEREO LINK" is "ON".
AUDIO IN 5/6 (LINKED)
ANALOG GAIN
0–68dB
DIGITAL GAIN
-42.0–0 .0–42.0dB
INPUT LEVEL
-INF–0.0–10.0dB
INPUT MUTE
OFF, ON
PHANTOM +48V
OFF, ON
PAN (*4)
LEFT–CENTER–RIGHT
STEREO LINK
OFF, ON
SOLO
OFF, ON
100
Explanation
Turns the compressor on/off.
Audio that exceeds the specified threshold level is compressed. This reduces the difference
Effect between the maximum volume and minimum volume, making the audio more comfortable
for listening
Specifies the level used as the threshold at which the compressor is applied.
Compression is applied to audio that exceeds the threshold.
Specifies the degree of compression applied to the audio. The state in which no
compression is applied is defined as "1".
Specifies the time until compression starts when audio exceeding the threshold is input.
Adjusts the length of time until compression ends after audio falls below the threshold.
Adjusts the final output volume level after applying the compressor.
Turns the equalizer on/off.
This is a 4-band parametric equalizer. It lets you shape the character of the sound by
Effect
boosting or cutting four frequency regions.
Boosts or attenuates the high band.
Adjusts the center frequency when changing the tone quality in the high band.
Boosts or attenuates the high-midrange band.
Adjusts the center frequency when changing the tone quality in the high-midrange
band.
Adjusts the width of the frequency band when boosting or attenuating high-midrange
band.
Boosts or attenuates the low-midrange band.
Adjusts the center frequency when changing the tone quality in the low-midrange band.
Adjusts the width of the frequency band when boosting or attenuating low-midrange
band.
Boosts or attenuates the low band.
Adjusts the center frequency when changing the tone quality in the low band.
Turns the voice changer function on/off.
Effect Transforms the pitch or character of the voice.
Adjusts the pitch of the voice in semitone steps. A setting of "0" is the original pitch.
Adjusts the character (formant) of the voice. Settings in the negative (–) direction
produce a more masculine vocal character, and settings in the positive (+) direction
produce a more feminine vocal character. A setting of "0" is the original voice.
If this is "ON", the voice is held at a fixed pitch, creating a mechanical robot-like
impression.
Adjusts the balance between the unprocessed voice (0) and the voice processed by the
effect (100).
Adjusts the input gain (sensitivity) in the analog domain.
Adjusts the input gain (sensitivity) in the digital domain (after conversion from analog to
digital).
Adjusts the input volume.
This can also be adjusted from the [3]–[6] faders. (*3)
Turns the mute function on/off. When this is "ON", the input audio is temporarily silenced.
Turns the phantom power on/off. When this is "ON", phantom power is supplied via the
AUDIO IN jacks (XLR).
* Changing "STEREO LINK" settings automatically turns "PHANTOM +48V" settings "OFF".
Adjusts the stereo position (pan).
Turns the stereo link function on/off. When this is "ON", AUDIO IN 3 and 4 (5 and 6) are
linked, and operate as a stereo channel.
* When stereo link is turned on, the settings of AUDIO IN 3 (5) are applied to AUDIO IN 4 (6).
Turns the solo function on/off. Only the audio for which this is "ON" is heard in the
headphones.
* The solo function applies to the headphone output. It does not affect output other than the
headphones.