Roland VR-6HD Reference Manual page 135

Value (bold text:
Menu item
default value)
When CTL/EXP TYPE=EXP
ASSIGN Specifies the function that is assigned to the expression pedal.
CATEGORY
N/A
VIDEO FADER
STILL OUTPUT
VIDEO PLAYER
OUTPUT
EXP
AUDIO INPUT LEVEL
AUDIO OUTPUT
LEVEL
VOICE CHANGER
REVERB LEVEL
CALIBRATION ENTER
Bluetooth
Menu item Value (bold text: default value) Explanation
Bluetooth PAIRING These are the Bluetooth-related settings.
OFF, ON
Bluetooth
PAIRING
EXEC
Displays the Bluetooth connection status.
OFF
STATUS
PAIRING MODE
NOT CONNECTED
CONNECTED
CAMERA CONTROL
Menu item Value (bold text: default value)
CAMERA ID CAMERA
N/A, JVC, Panasonic, Canon PTZ,
PROTOCOL
VISCA over IP, PTZOptics, Avonic
IP ADDRESS 192 .168 .0 .101
LOGIN NAME ENTER
PASSWORD ENTER
CAMERA PRESET PRESET
RECALL EXEC
OFF
ALL CAMERAS RECALL
ON
STORE
EXEC
TALLY CH VIDEO IN
Explanation
VALUE
––
FADE, CUT
STILL 1–16
––
AUDIO IN 1–7/8, USB IN,
Bluetooth IN,
AUDIO PLAYER
VIDEO 1–6, V.PLAYER
MAIN BUS, AUX 1 BUS, AUX 2 BUS,
USB OUT, STREAM/RECORD
AUDIO IN 1 PITCH
AUDIO IN 1 FORMANT
AUDIO IN 1 MIX
AUDIO IN 2 PITCH
AUDIO IN 2 FORMANT
AUDIO IN 2 MIX
––
The EXP CALIBRATION screen appears.
Following the direction on the screen, calibrate (adjust) the expression pedal.
The first time you use the expression pedal, be sure to execute calibration so that the pedal will operate
optimally.
In some cases, the expression pedal might no longer be operating optimally because of the passage of time
or the conditions of use. In such cases you should also execute expression pedal calibration.
Turns the Bluetooth function on/off.
Begins pairing with a Bluetooth device.
Bluetooth off
Now pairing
Waiting for connection
Connected
Explanation
1–6 Selects the camera to be controlled.
Specifies the camera's protocol.
Input the camera's IP address.
Displays the LOGIN NAME screen.
Enter the login name needed to connect with the camera when "PROTOCOL" is "JVC".
Displays the PASSWORD screen.
Enter the password needed to connect with the camera when "PROTOCOL" is "JVC".
1–6 Selects the preset used when recalling or registering the settings.
Touch the screen to recall the preset from a camera.
Recall presets from the camera that is being controlled.
Simultaneously recall presets from all cameras (CAMERA 1–6).
Touch the screen to register the settings from a camera as a preset.
* Presets are saved in the camera itself.
Specifies the connector from which the camera video is input. When the camera video from
1–6
the VR-6HD is the final output, the camera's tally light is lit.
Explanation
No function is assigned.
FADE:
Operates the video fader.
CUT:
Cuts between the final output video and the preview video.
Pauses the normal output, and previews or final outputs a cut of the still
image.
Temporarily pauses the normal output, and previews or final outputs a
cut of the video player's video signal.
Adjusts the input volume.
Adjusts the output volume.
Adjusts the balance between the unprocessed voice (0) and the voice
processed by the effect (100).
Adjusts the amount of sound that is returned from the reverb (return
level).
Menu List
135