Äusing A Footswitch - Roland VR-6HD Reference Manual

Other Functions
Using a Footswitch
You can use a footswitch connected to the CTL/EXP 1 and 2 jacks to control the VR-6HD with your foot. You can assign various functions to the footswitch.
Ó
1 .
[MENU] button "REMOTE"
Ó
"CTL/EXP 2" select "CTL/EXP TYPE", and press the [VALUE]
knob.
2 .
Set the connected device to "CTL A & CTL B" (the footswitch)
using the [VALUE] knob, and press the [VALUE] knob.
3 .
Use the [VALUE] knob to select CTL A or CTL B "CATEGORY"
and "VALUE", and press the [VALUE] knob.
4 .
Use the [VALUE] knob to select the function that you want
to assign to CTL A or CTL B of the footswitch, and press the
[VALUE] knob.
ÁCATEGORY
Value
N/A
PGM CH SELECT
PST CH SELECT
AUX CH SELECT
INPUT 1–6 ASSIGN
STILL OUTPUT
VIDEO PLAYER OUTPUT
PinP & KEY 1–2 SOURCE
DSK SOURCE
BUTTON CONTROL
AUDIO INPUT MUTE
AUDIO OUTPUT MUTE
AUDIO INPUT SOLO
AUDIO OUTPUT SOLO
VOICE CHANGER
AUTO MIXING
REVERB(MOMENTARY)
REVERB(ALTERNATE)
OUTPUT FADE
LOAD MEMORY
INPUT SCAN
SCENE MEMORY SCAN
PinP & KEY 1–2 SCAN
88
Ó Ó
"CTL/EXP" "CTL/EXP 1" or
Explanation
No function is assigned.
Switches the video sent to the PGM bus.
Switches the video sent to the PST bus.
Switches the video sent to the AUX bus.
Changes the video assigned to INPUT 1–6.
Pauses the normal output, and previews
or final outputs a cut of the still image.
Temporarily pauses the normal output,
and previews or final outputs a cut of the
video player's video signal.
Switches the video source of the inset
screen.
Switches the DSK video source.
This works the same as when you press
the button selected in "VALUE".
Turns the mute function on/off for the
input audio.
Turns the mute function on/off for the
output audio.
Turns the solo function on/off for the
input audio.
Turns the solo function on/off for the
output audio.
Turns the voice changer function on/off.
Turns the auto mixing function on/off.
Reverb turns on only while you press the
footswitch.
Turns reverb on/off.
The final output video fades in/out.
Recalls a scene memory.
Each time you press the footswitch, the
INPUT 1–6 video changes in order.
Each time you press the footswitch, scene
memories 1–32 are recalled in order.
The PinP & KEY 1–2 inset screen videos
switch in order each time you press the
footswitch.
Value
DSK SCAN
MACRO EXECUTE
SEQUENCER
GPO (ONE SHOT)
GPO (ALTERNATE)
ÁVALUE
Configures the detailed settings related to "CATEGORY".
5 .
Press the [MENU] button to close the menu.
MEMO
¹ See "Connecting a Footswitch" (p. 9) for how to connect a
footswitch to this unit.
¹ If a single-pedal type footswitch such as the BOSS FS-5U is
connected using a phone cable (mono), the function assigned by
"CTL B" is enabled.
Explanation
The DSK caption video switches in order
each time you press the footswitch.
Executes a macro (a series of recorded
operations).
When the sequencer function is on, this
works the same as when you press the
button selected in "VALUE".
Outputs a control signal for 0.5 seconds.
The control signal output is switched on/
off with each press of the footswitch.