Roland VR-6HD Reference Manual page 101

Menu item Value (bold text: default value)
0 .0–500msec
DELAY
(0–25.0/29.9/30.0frame)
REVERB SEND
0–127
MAIN BUS
This configures the MAIN bus.
SEND
OFF,
AUX 1 BUS
This configures the AUX 1 bus.
SEND LEVEL
-INF–10.0dB
DRY
PRE FADER
SEND POINT
POST FADER
AUX 2 BUS
This configures the AUX 2 bus.
SEND LEVEL
-INF–10.0dB
DRY
PRE FADER
SEND POINT
POST FADER
HIGH PASS FILTER 80Hz
OFF, ON
NOISE GATE
OFF, ON
THRESHOLD
-80–-48–0dB
RELEASE
30–500–5000msec
DE-ESSER
OFF, ON
SENS
0–80–100
DEPTH
0–64–100
COMPRESSOR
OFF, ON
THRESHOLD
-50–-8–0dB
1.00:1, 1.12:1, 1.25:1, 1.40:1,
1.60:1, 1.80:1, 2.00:1, 2 .50:1,
RATIO
3.20:1, 4.00:1, 5.60:1, 8.00:1,
16.0:1, INF:1
ATTACK
0–30–100msec
RELEASE
30–250–5000msec
MAKEUP GAIN
-40–0–40dB
EQUALIZER OFF, ON
Hi GAIN
-12.0–0 .0–12.0dB
Hi FREQUENCY
1.00–10 .0–20.0kHz
Hi-Mid GAIN
-12.0–0 .0–12.0dB
Hi-Mid FREQUENCY
20Hz–2 .00kHz–20.0kHz
Hi-Mid Q
0.5–1 .0–16.0
Lo-Mid GAIN
-12.0–0 .0–12.0dB
Lo-Mid FREQUENCY
20Hz–500Hz–20.0kHz
Lo-Mid Q 0.5–1 .0–16.0
Lo GAIN -12.0–0 .0–12.0dB
Lo FREQUENCY 20Hz–100Hz–2.00kHz
(*3) When "STEREO LINK" is "ON", the [4]–[6] fader operations are disabled.
(*4) This can be set if "STEREO LINK" is "OFF".
ON
Explanation
Adjusts the delay time of the audio.
Effect Outputs audio with a delay.
Adjusts the amount of audio sent to reverb.
When this is "ON", audio is sent to the MAIN bus.
These parameters adjust the amount of audio sent to the AUX 1 bus.
Sends the source audio with no effects applied.
Sends the effect-applied audio.
The send volume is constant, regardless of the volume (INPUT LEVEL).
Sends the effect-applied audio.
The send volume can be changed by adjusting the volume (INPUT LEVEL).
These parameters adjust the amount of audio sent to the AUX 2 bus.
Sends the source audio with no effects applied.
Sends the effect-applied audio.
The send volume is constant, regardless of the volume (INPUT LEVEL).
Sends the effect-applied audio.
The send volume can be changed by adjusting the volume (INPUT LEVEL).
Turns the high-pass filter on/off.
Effect Cuts off unneeded low-band audio. The cutoff frequency is 80 Hz.
Turns the noise gate on/off.
Eliminates audio that is lower than the specified threshold level. This is effective when the
Effect noise that you want to remove is separate from the audio that you want to keep, and can be
used to remove hiss or other noise that is heard during periods of silence.
Specifies the level used as the threshold for removing audio. Audio below the level set
here is removed.
Adjusts the length of time until the audio is fully attenuated after audio falls below the
threshold.
Turns the de-esser on/off.
Reduces sibilant noise (the sounds you hear when pronouncing "s" words and other hissing
Effect
sounds).
Adjusts the sensitivity with which sibilants are detected.
Adjusts the intensity of the effect.
Turns the compressor on/off.
Audio that exceeds the specified threshold level is compressed. This reduces the difference
Effect between the maximum volume and minimum volume, making the audio more comfortable
for listening
Specifies the level used as the threshold at which the compressor is applied.
Compression is applied to audio that exceeds the threshold.
Specifies the degree of compression applied to the audio. The state in which no
compression is applied is defined as "1".
Specifies the time until compression starts when audio exceeding the threshold is input.
Adjusts the length of time until compression ends after audio falls below the threshold.
Adjusts the final output volume level after applying the compressor.
Turns the equalizer on/off.
This is a 4-band parametric equalizer. It lets you shape the character of the sound by
Effect
boosting or cutting four frequency regions.
Boosts or attenuates the high band.
Adjusts the center frequency when changing the tone quality in the high band.
Boosts or attenuates the high-midrange band.
Adjusts the center frequency when changing the tone quality in the high-midrange band.
Adjusts the width of the frequency band when boosting or attenuating high-midrange band.
Boosts or attenuates the low-midrange band.
Adjusts the center frequency when changing the tone quality in the low-midrange band.
Adjusts the width of the frequency band when boosting or attenuating low-midrange
band.
Boosts or attenuates the low band.
Adjusts the center frequency when changing the tone quality in the low band.
Menu List
101