Roland VR-6HD Reference Manual page 134

Menu List
CTL/EXP
Value (bold text:
Menu item
default value)
CTL/EXP 1, 2
These settings for the footswitch or expression pedal connected to the CTL/EXP 1, 2 jacks.
Settings for the devices (footswitch or expression pedal) connected to the CTL/EXP 1, 2 jacks.
OFF
CTL/EXP TYPE
CTL A & CTL B
EXP
When CTL/EXP TYPE=CTL A & CTL B
ASSIGN Specifies the functions that are assigned to CTL A and CTL B of the footswitch.
CATEGORY
N/A
PGM CH SELECT
PST CH SELECT
AUX CH SELECT
INPUT 1–6 ASSIGN
STILL OUTPUT
VIDEO PLAYER OUTPUT
PinP & KEY 1–2 SOURCE
DSK SOURCE
BUTTON CONTROL
AUDIO INPUT MUTE
AUDIO OUTPUT MUTE
AUDIO INPUT SOLO
CTL A
AUDIO OUTPUT SOLO
CTL B
VOICE CHANGER
AUTO MIXING
REVERB(MOMENTARY)
REVERB(ALTERNATE)
OUTPUT FADE
LOAD MEMORY
INPUT SCAN
SCENE MEMORY SCAN
PinP & KEY 1–2 SCAN
DSK SCAN
MACRO EXECUTE
SEQUENCER
GPO (ONE SHOT)
GPO (ALTERNATE)
134
Explanation
Disables the CTL/EXP jack.
Choose this if a footswitch is connected.
Choose this if an expression pedal is connected.
VALUE
––
INPUT 1–6
INPUT 1–6
INPUT 1–6
VIDEO 1–6, STILL 1–16, V.PLAYER, INPUT 1–6
STILL 1–16
––
VIDEO 1–6, STILL 1–16, V.PLAYER, INPUT 1–6
VIDEO 1–6, STILL 1–16, V.PLAYER, INPUT 1–6
CUT BUTTON, AUTO BUTTON
MIX BUTTON
WIPE BUTTON
SPLIT BUTTON
PinP & KEY 1–2 PVW BUTTON
PinP & KEY 1–2 PGM BUTTON
DSK PVW BUTTON
DSK PGM BUTTON
AUDIO EFFECT 1–3 BUTTON
AUDIO PLAYER 1–6 BUTTON
AUDIO IN 1–7/8, USB IN, Bluetooth IN,
AUDIO PLAYER, VIDEO 1–6, V.PLAYER
MAIN BUS, AUX 1 BUS, AUX 2 BUS, USB
OUT, STREAM/RECORD
AUDIO IN 1–7/8, USB IN, Bluetooth IN,
AUDIO PLAYER, VIDEO 1–6, V.PLAYER
MAIN BUS, AUX 1 BUS, AUX 2 BUS
AUDIO IN 1, 2
––
––
––
––
MEMORY 1–32
NORMAL
REVERSE
NORMAL
REVERSE
NORMAL
REVERSE
NORMAL
REVERSE
MACRO 1–100
MODE ON/OFF, NEXT, PREVIOUS,
AUTO SEQUENCE
GPO 1–16
GPO 1–16
Explanation
No function is assigned.
Switches the video sent to the PGM bus.
Switches the video sent to the PST bus.
Switches the video sent to the AUX bus.
Changes the video assigned to INPUT 1–6.
Pauses the normal output, and previews or final outputs a cut of the still image.
When a control signal is input again, the signal output returns to normal.
Temporarily pauses the normal output, and previews or final outputs a cut of the
video player's video signal.
Switches the video source of the inset screen.
Switches the DSK video source.
This works the same as when you press the button selected in "VALUE".
Turns the mute function on/off for the input audio.
Turns the mute function on/off for the output audio.
Turns the solo function on/off for the input audio.
Turns the solo function on/off for the output audio.
Turns the voice changer function on/off.
Turns the auto switching function on/off.
Reverb turns on only while you press the footswitch.
Turns reverb on/off.
The final output video fades in/out.
Recalls a scene memory.
Each time you press the footswitch, the final output switches from INPUT 1–6 in
sequential order.
Each time you press the footswitch, the final output switches in reverse order from
INPUT 6 through 1.
Each time you press the footswitch, scene memories 1–32 are recalled in
sequential order.
Each time you press the footswitch, scene memories are recalled in reverse order
from 32 through 1.
Each time you press the footswitch, the PinP & KEY 1–2 inset screen videos switch
Ó
between VIDEO IN 1–6 STILL 1–16 in order.
Each time you press the footswitch, the PinP & KEY 1–2 inset screen videos switch
Ó
between STILL 16–1 VIDEO IN 6–1 in order .
Each time you press the footswitch, the DSK caption video switches between
Ó
VIDEO IN 1–6 STILL 1–16 in order.
Each time you press the footswitch, the DSK caption videos switch between STILL
Ó
16–1 VIDEO IN 6–1 in order.
Executes a macro (a series of recorded operations).
When the sequencer function is on, this works the same as when you press the
button selected in "VALUE".
Outputs a control signal for 0.5 seconds.
The control signal output is switched on/off with each press of the footswitch.