BayStream 7.3 Documentation Change Notice
Using Site Manager
To use Site Manager to enable collection of billing information for SVCs and/or
PVCs on an interface, perform the following steps:
You do this
1. In the Configuration Manager window,
choose Protocols.
2. Choose Frame Relay Switch.
3. Choose Interfaces.
4. Click on Edit.
5. At the Edit FRSW Interface window, set
the following parameters:
•
SVC Billing Enable
•
PVC Billing Enable
6. Click on Save.
7. Click on Done.
Using the Technician Interface
To enable billing information collection on an interface, perform the following
steps:
Use the Technician Interface list command to display interfaces currently
1.
configured on the BayStream switch (as shown in
40
BayStream Multiservice Software Version 7.3
Site Manager Procedure
System responds
The DLCMI Configuration window
opens.
The Edit FRSW Interface window
opens.
Site Manager returns you to the
Configuration Manager window.
Figure
9).
115385-D Rev 01