Statistical Data Collection - Bay Networks Baystream 7 Notice

Name: wfHssiReceiveAllFrames
Object ID: 1.3.6.1.4.1.18.3.4.7.1.68
Type: Integer
Access: Read/Write
Default: Disabled (2)
Description: This attribute enables delivery of all received frames to the HSSI device driver for
processing. When disabled (2), frames less than 4 bytes in length are filtered out of the
receive frame stream before reaching the device driver. This attribute must be set to
enabled (1) to receive 3-byte frames over frame relay switched virtual circuits (SVCs).
Name: wfHssiFrSwRnniEnabled
Object ID: 1.3.6.1.4.1.18.3.4.7.1.69
Type: Integer
Access: Read/Write
Default: Disabled (2)
Description: This attribute when enabled (1), signifies that this HSSI device driver is running frame
relay switch WAN protocol and is configured for Resilient NNI.

Statistical Data Collection

Name: wfStatsDcAtmzVclFields
Object ID: 1.3.6.1.4.1.18.3.3.2.17.1.22
Type: Gauge
Access: Read/Write
Default: 0xFFFFFE00
Description: Contains a 32-position bit mask specifying the ATM VCL counters that the BayStream
data collection software gathers, aggregates, and reports for each ATM line on which
statistical data collection is enabled. A value of 1 within the bit mask indicates that the
BayStream data collection software monitors and reports the associated ATM counter; a
value of 0 within the bit mask indicates that the BayStream data collection software
ignores the associated ATM counter. The default value (0xFFFFFE00) monitors and
reports the first 22 items in,
mask positions.
115385-D Rev 01
BayStream 7.3 Documentation Change Notice
Figure 9 which maps specific ATM counters with specific bit
BayStream Multiservice Software Version 7.3
119