Using The Technician Interface - Bay Networks Baystream 7 Notice

Method 2
Perform the following steps:
You do this
1. In the Configuration Manager window,
choose Protocols.
2. Choose Frame Relay Switch.
3. Choose RNNI Global.
4. Choose one of the Resilient NNI links.
5. Choose Edit.
6. Choose Add.
7. Choose the second HSSI Resilient NNI
link.
8. Choose Select.
9. Choose RNNI.
10. Click on Done.
11. Click on Done.

Using the Technician Interface

To configure a Resilient NNI, provision the following MIB entries:
•
115385-D Rev 01
Two wfHssiEntry instances with the wfHssiFrSwRnniEnabled attribute set to
Enabled. The wfHssiCct attributes should have the same circuit number.
For example, to create two HSSI links with Resilient NNI enabled on slot 4
and slot 5 using circuit number 3, do the following:
[4:1] $ set wfHssiEntry.wfHssiFrSwRnniEnabled.4.1 1
[4:1] $ set wfHssiEntry.wfHssiCct.4.1 3
BayStream Multiservice Software Version 7.3
BayStream 7.3 Documentation Change Notice
Site Manager Procedure
System responds
The Edit Connector window
opens.
The Circuit Definition window
opens.
Site Manager returns you to the
Circuit Definition window.
25