Advanced Manager Options - Bay Networks Nautica 200 Reference Manual

Parameter:
MTC:
Default:
Options:
Function:
Parameter:
Instructions:
Parameter:
MTC:
Default:
Options:
Function:

Advanced Manager Options

117237-C Rev. A
Private-Community
pr
PRIVATE, unless changed by user
A valid password
This password allows SNMP "set" messages to change
the configuration parameters.
Note: The password entered here is case sensitive.
SNMP-Trap-Addr-1 to 4
(see below)
Addr-1 to Addr-4
No MTC
0.0.0.0
Valid IP addresses
Four SNMP trap addresses can be set. These are the IP
addresses that SNMP traps will be sent to. If left at the
default 0.0.0.0, no traps will be sent.
To select the Advanced options, the user must set
Advanced-Manager to Yes in the
configuration MUST then be SAVEd. The Advanced Manager
allows more options to be set in Paths and OSPF.
Modifying System Settings
system# context. The
5-15