Enabling Traffic Policing Using Site Manager; Disable Of Pvc And Svc Billing - Bay Networks Baystream 7 Notice

Enabling Traffic Policing Using Site Manager

To enable traffic policing, perform the following steps:
You do this
1. In the Configuration Manager window,
choose Protocols.
2. Choose Frame Relay Switch.
3. Choose Interfaces.
4. Select an interface.
5. Choose Edit.
6. Set the following parameter:
• Burst Measurement: Enable
7. Choose Save.
8. Click on Done.

Disable of PVC and SVC Billing

You can enable or disable the collection of billing information for either switched
virtual circuits (SVCs) or permanent virtual circuits (PVCs) on an interface using
either Site Manager or the Technician Interface.
115385-D Rev 01
BayStream 7.3 Documentation Change Notice
Site Manager Procedure
BayStream Multiservice Software Version 7.3
System responds
Site Manager displays a list of
frame relay switch interfaces.
The Edit FRSW Interface window
opens.
Site Manager returns you to the
list of frame relay switch
interfaces.
Site Manager returns you to the
Configuration Manager window.
39