Changes To Configuring Frame Relay Switching Services - Bay Networks Baystream 7 Notice
Documentation change
Hide thumbs
Also See for Baystream 7:
- Configuration and troubleshooting manual (186 pages) ,
- Software manual (46 pages) ,
- Install manual (38 pages)
Table of Contents
Advertisement
BayStream 7.3 Documentation Change Notice
Changes to Configuring Frame Relay Switching Services
This section provides the modified description of the VC ATM/FR-IW EFCI
Policy parameter.
The VC ATM/FR-IW EFCI Policy parameter has been revised as follows:
Parameter: VC ATM/FR-IW EFCI Policy
Path: Configuration Manager > Protocols > Frame Relay Switch > PVCs >
Permanent VCs > Edit
Default: MAP FR FECN TO ATM EFCI
Options: MAP FR FECN TO ATM EFCI
Function: Indicates the policy for translating frame relay forward explicit congestion
notification (FECN) to ATM explicit forward congestion indication (EFCI) on
this frame relay PVC, or setting FR FECN to a constant value for all frames.
This parameter is relevant only when frame relay to ATM interworking is
enabled for this PVC.
Instructions: Accept the default.
MIB Object ID: 1.3.6.1.4.1.18.3.5.9.6.7.1.67
122
BayStream Multiservice Software Version 7.3
|
|
SET FECN TO 1
SET FECN TO 0
115385-D Rev 01
Advertisement
Table of Contents
