Table 8. Reallocating Memory - Bay Networks Baystream 7 Notice

Table 8.
To perform this
function
Repartition local
memory to the
global pool and
restart the slot
Repartition global
memory to the local
pool and restart the
slot
Use the
factory-default
values and restart
the slot
115385-D Rev 01
BayStream 7.3 Documentation Change Notice
Reallocating Memory
Do the following
1. Click on Up until the amount of memory you want appears,
or type a value next to the Dedicated to Global Pool
parameter.
2. Click on Update.
A window displays the prompt
Save memory configuration for slot # <no.> ?
Note: You must also Save from the
Configuration Manager->File->Save menu
selection.
3. Click on OK.
The slot restarts.
1. Click on Down until the amount of memory you want
appears, or type a value next to the Dedicated to Global
Pool parameter.
2. Click on Update.
A window displays the prompt
Save memory configuration for slot # <no.> ?
Note: You must also Save from the
Configuration Manager->File->Save menu
selection.
3. Click on OK.
The slot restarts.
Click on Default rather than Update. Click on OK
after the confirmation message appears.
The slot restarts.
BayStream Multiservice Software Version 7.3
55