Table of Contents
Advertisement
MAT PC hardware and software requirements
ITG Trunk 2.0 ISDN Signaling Link (ISL)
ITG MAT PC management configuration
A PC security device is required for every PC running MAT 6.6. A security
device is not required for the PC server as it is only used to store MAT data
and does not actually run any MAT applications.
Each of the MAT client PCs on the customer LAN are allowed connectivity
to IP addresses of the Meridian 1;s:
1
MAT client PC in switchroom has access to the File Server on the
customer network
2
Block broadcast messages from the customer LAN to the Meridian 1
private LAN.
3
Block access to the Meridian 1 private LAN from non-MAT client PCs
for security reasons.
The list below provides the recommended minimum PC hardware and
software recommended to run MAT 6.6. Other applications launched while
you use MAT may require increased RAM:
•
A Pentium Processor PC with:
— 100 MHz or faster CPU
— One GB or larger hard disk drive with 500 MB or more free space
(includes Windows 95/NT 4.0 requirements.) Please refer to system
datastore column in the hard drive requirements chart that follows:
•
32 MB or RAM (minimum)
•
SVGA color monitor and interface card (800x600 resolution for
graphics)
•
3-1/2 inch 1.44 MB floppy disk drive
•
Windows 95 or Windows NT 4.0 with Microsoft TCP/IP installed
•
Ethernet Network Interface Card
•
Hayes-compatible modem is optional to connect to remote systems,
required for polling configurations (9600 bps or better is recommended)
•
PC COM port with 16550 UART
Description, Installation and Operation
Page 151 of 378
Advertisement
Table of Contents
