Camera Connection Setup - Teledyne FLIR A68 Series User Manual

Camera Connection Setup

• Connect A68/A38 to the spare NIC and wait for the GigE Server Icon in the
Windows tray to show that the A68/A38 is connected.
If the camera is not automatically detected, refer to the
for possible solutions.
• The A68/A38 Status LED will be steady Blue.
• Start CamExpert. The A68/A38 Status LED will be steady light blue.
• Select the FLIR A68/A38 series camera using the Device Selector:
• Click the Grab button for live acquisition.
• Adjust the lens as required (if no lens is available, select a test pattern from the
Image Format Controls category).
• If a firmware update is available for the camera see the
section for information how to perform a firmware update.
• To obtain the best quality images possible, a single point fixed pattern noise (FPN)
correction can be performed when the camera is at the required working
temperature in the expected application environment. For more information on how
to perform FPN correction, see the
FLIR A68/A38 Series IR Camera User's Manual
Fixed Pattern Noise Correction
Troubleshooting
he
Camera Firmware Updates
section.
Quick Start Guide • 29
section