Camera Information Feature Descriptions; Table 17: Camera Information Feature Descriptions - Teledyne FLIR A68 Series User Manual

Camera Information Feature Descriptions

The following table describes these parameters along with their view attribute and in
which device version the feature was introduced.

Table 17: Camera Information Feature Descriptions

Display Name
Manufacturer Name
Model Name
Family Name
Manufacturer Info
Part Number
Lens ID
Serial Number
Device Version
Firmware Version
Firmware Revision
Calibration Date
Device User ID
Device Type
Device Scan Type
Device Sensor Type
Connection Speed
Heartbeat Mode
Heartbeat Timeout (in
μs)
Device Reset
100 • Operational Reference
Feature & Values
DeviceVendorName
DeviceModelName
DeviceFamilyName
DeviceManufacturerInfo
deviceManufacturerPartNumber
lensID
DeviceSerialNumber
DeviceVersion
DeviceFirmwareVersion
deviceManufacturerFirmwareNumber
calibrationDate
DeviceUserID
DeviceType
DeviceScanType
deviceSensorType
DeviceConnectionSpeed
DeviceLinkHeartbeatMode
DeviceLinkHeartbeatTimeout
DeviceReset
Description
Displays the device vendor name.
Displays the device model name.
Displays the identifier of the product
family of the camera.
Displays extended manufacturer
information about the camera.
Displays the device part number.
Description of factory-installed lens.
Displays the device's factory set
serial number.
Displays the device version.
Displays the currently loaded
firmware version number. Firmware
files have a unique number and
have the .cbf file extension.
Displays the currently loaded
firmware revision.
Displays the date of factory camera
calibration. The date format is
0xYYYYMMDD.
Feature to store a user-
programmable identifier of up to 15
characters. (RW)
Displays the device type. For FLIR
A68/A38 series the device type is
Transmitter.
Displays the device scan type. For
FLIR A68/A38 series the scan type is
Areascan.
Displays the sensor type. For FLIR
A68/A38 series the sensor type is
LWIR (Long Wave Infrared).
Displays the transmission speed
negotiated by the network interface,
in bytes per second. For a GigE
connection this is 125000000 Bps.
Sets the enable state of heartbeat
verification.
Sets the heartbeat timeout, in
microseconds. If heartbeat
verification is enabled and the
camera does not receive messages
from the host application during a
certain period, the camera will
disconnect to make itself available to
other host applications. Applications
using Sapera LT to access the
camera do not have to manage this
explicitly because Sapera LT will
maintain the connection.
Resets the device to its power up
state. (W)
FLIR A68/A38 Series IR Camera User's Manual
View
Beginner
Beginner
Invisible
Beginner
Beginner
DFNC
Guru
DFNC
Beginner
Expert
Beginner
Guru
DFNC
Expert
DFNC
Beginner
Guru
Expert
Expert
DFNC
Expert
Guru
Guru
Beginner