User Set Control Category; User Set Control Feature Descriptions; Figure 56: Camexpert User Set Control Category; Table 27: User Set Control Feature Descriptions - Teledyne FLIR A68 Series User Manual

User Set Control Category

The User Set Control category, as shown by CamExpert, allows users to select the
power-up configuration. In addition, CamExpert provides a dialog box, available
through the Power-up Configuration feature in the Camera Information category, which
combines the features to select the camera power-up state and for the user to save or
load a A68/A38 camera state: for more information refer to the Power-up Configuration
Dialog section.

User Set Control Feature Descriptions

The following table describes these parameters along with their view attribute.

Table 27: User Set Control Feature Descriptions

Display Name
Power-up
Configuration Selector
Factory Setting
User Settings 1
User Settings 2
136 • Operational Reference

Figure 56: CamExpert User Set Control Category

Feature & Values
UserSetDefaultSelector
Default
UserSet1
UserSet2
Description
Selects the camera configuration set to load
and make active on camera power-up or
reset. The camera configuration sets are
stored in camera non-volatile memory. (RW)
Load factory default feature settings.
Select the User Defined Configuration space
UserSet1 to save to or load from features
settings previously saved by the user.
Select the User Defined Configuration space
UserSet2 to save to or load from features
settings previously saved by the user.
FLIR A68/A38 Series IR Camera User's Manual
View
Beginner