Flir A68/A38 Series Specifications; Table 2: Flir A68/A38 Series Specifications - Teledyne FLIR A68 Series User Manual

FLIR A68/A38 Series Specifications

The FLIR A68/A38 Series camera has the following specifications:

Table 2: FLIR A68/A38 Series Specifications

Mechanical Interface
Camera with M25 Lens Mount (W x H x L)
Mass (without lens)
Power connector
Electrical Interface
Input Voltage
Power Consumption, for different power
supply configurations:
12 V
24 V
Power over Ethernet (48V)
Environmental Conditions
Operating Temperature (Ambient)
Operating Relative Humidity
Storage Temperature
Storage Relative Humidity
Sensor Information
Spectral Response
Pixel Pitch
Focal Plane Array
Camera Information
Boot time
Internal mechanical shutter activation time
NETD
<50 mK
1. Extended or limited operating temperature ranges are available; contact Teledyne FLIR for more
information.
2. To avoid possible damage, when storing cameras, ensure that the sensor is not exposed to air; use a
lens cap or lens to cover the sensor.
3. Camera NETD measures the actual noise in output images, using an f/1.0 lens, with processing, at
30fps.
WARNING: These sensors are sensitive to over-exposure to hot objects; the
sensors are considered "sun-safe" in the sense that pixels will not break if over
exposed for short periods; however, long exposure to hot bodies (like the sun)
will eventually create ghost-like artifacts. These artifacts can be made to
disappear by recalibrating the FPN compensation (see
Correction).
WARNING: For cameras not equipped with a lens, do not touch the internal
mechanical shutter; any physical contact to the shutter may render it unusable.
16 • FLIR A68/A38 Series Overview
1
2
3
29mm x 36mm x 59mm (with lens mount)
67.2 g
via Samtec 10-pin connector (or optionally using Power-
over-Ethernet)
12/24V DC (min 9V, max 57V)
Typical
2.8 W
2.8 W
3.5 W
1
-35°C to 60°C
maximum 80% non-condensing
-40°C to +80°C
maximum 80% non-condensing
8-14μm (LWIR)
17μm
640x480 (VGA) or 320x240 (QVGA)
7.5s ± 1s (from power-up to detection by Sapera LT
library running on Windows using Persistent IP address)
<100ms to change from open/closed position
Scene Range (°C)
FLIR A68/A38 Series IR Camera User's Manual
Peak
(usually due to shutter activation)
4.4 W
4.4 W
4.8 W
-25 to 200
Fixed Pattern Noise