Installing Sapera LT
Note: To install Sapera LT and the GigE Vision package, logon to the
workstation as an administrator or with an account that has administrator
privileges.
When A68/A38 is used in a Sapera development environment, Sapera LT 8.41 or
greater needs to be installed, which automatically provides all GigE Vision camera
support.
If no Sapera development is required. then the Sapera LT SDK is not needed to control
the A68/A38 camera. Sapera runtime with CamExpert provides everything to control
the camera.
Procedure
•
Download and install Sapera 8.41 or greater which automatically provides GigE
Vision support.
•
Connect the camera to an available Gigabit NIC.
Refer to Sapera LT User's Manual concerning application development with Sapera.
Note: The Teledyne DALSA Sapera CamExpert tool (used throughout this
manual to describe A68/A38 features) is installed with either the Sapera
LT runtime or the Sapera LT development package.
Camera Firmware Updates
Under Windows, the user can upload new firmware, downloaded from Teledyne DALSA
support, using the
Firmware via Linux or Third-Party Tools
Consult your third-party GigE Vision software package for file uploads to the connected
device.
92 • Operational Reference
File Access Control
features provided by the Sapera CamExpert tool.
FLIR A68/A38 Series IR Camera User's Manual