Table 14: Static Contrast Mode Example - Teledyne FLIR A68 Series User Manual

Given the minimum and maximum values are 30021 and 33023, respectively, the
static minimum and maximum gain values can be set accordingly, slightly outside this
range so that the resulting image utilizes as wide a dynamic range as possible, without
saturating at higher values or clipping at lower values..

Table 14: Static Contrast Mode Example

Image
Static Contrast Mode (Fixed Range of Scene Temperature)
This is the camera operation used when feature
StaticTemperature. This static contrast mode maps a fixed range of sensor pixel values
to the 8-bit output image. But whereas the previous contrast mode
Static) explicitly requires configuring a range of DN values in the 16-bit input image,
the StaticTemperature contrast mode is easier to configure using a range of scene
temperatures. This range is set through the
contrastMaxValueCelsius
values in the input 16-bit input image and reports them the
contrastMaxValue
how the values of
FLIR A68/A38 Series IR Camera User's Manual
features. The camera automatically computes the associated
features. Refer to
contrastMinValue
8-Bit Image Histogram
Minimum and maximum contrast values applied
contrastMode
contrastMinValueCelsius
Converting Pixel Values to Temperatures
and contrastMaxValue
is set to
(contrastMode
and
contrastMinValue
are computed.
Features and Configuration Options • 75
=
and
to see