Table of Contents
Advertisement
Acquisition Control Category
The Acquisition Control category, as shown by CamExpert, has parameters used to
configure the optional acquisition modes of the device.
Acquisition Control Feature Descriptions
The following table describes these parameters along with their view attribute. Note
that when using the Sapera LT API to control a camera, most of these features
(exception made for AcquisitionArm and transferFrameSkip) are handled by Sapera
LT's SapTransfer object).
Table 23: Acquisition Control Feature Descriptions
Display Name
Acquisition Mode
Acquisition Start
Acquisition Arm
Acquisition Stop
Acquisition Frame
Count
Frame Rate (in Hz)
FLIR A68/A38 Series IR Camera User's Manual
Figure 52: CamExpert Acquisition Control
Feature & Values
AcquisitionMode
AcquisitionStart
AcquisitionArm
AcquisitionStop
AcquisitionFrameCount
AcquisitionFrameRate
Description
Set the acquisition mode of the device. It
defines the number of frames to capture
during an acquisition and the way the
acquisition stops.
Start image capture using the currently
selected acquisition mode. The number of
frames captured is specified by
AcquisitionMode feature.
Arms the device before an AcquisitionStart
command. This optional command validates all
the current features for consistency and
prepares the device for a fast start of the
acquisition. If not used explicitly, this
command is automatically executed at the first
AcquisitionStart but will not be repeated for
subsequent ones unless a data transfer related
feature is changed in the device.
Stops the Acquisition of the device at the end
of the current frame unless the
triggerFrameCount feature is greater than 1.
Number of frames to be acquired in MultiFrame
acquisition mode.
Returns the camera internal frame rate.
Operational Reference • 117
View
Beginner
Beginner
Guru
Beginner
Beginner
Beginner
Advertisement
Table of Contents
Troubleshooting
