Table 29: Gige Vision Transport Layer Feature Descriptions - Teledyne FLIR A68 Series User Manual

GigE Vision Transport Layer Feature Descriptions
The following table describes these parameters along with their view attribute.

Table 29: GigE Vision Transport Layer Feature Descriptions

Display Name
Heartbeat Timeout (in
μs)
Supported Options
Selector
Option Supported
True
False
Interface MAC Address
LLA
DHCP
Persistent UP
Current IP Address
Current Subnet Mask
Current Default
Gateway
IP Configuration Status
PersistentIP
DHCP
LLA
Persistent IP Address
FLIR A68/A38 Series IR Camera User's Manual
Feature & Values
GevHeartbeatTimeout
GevSupportedOptionSelector
GevSupportedOption
GevMACAddress
GevCurrentIPConfigurationLLA
GevCurrentIPConfigurationDHCP
GevCurrentIPConfigurationPersistentIP
GevCurrentIPAddress
GevCurrentSubnetMask
GevCurrentDefaultGateway
GevIPConfigurationStatus
GevPersistentIPAddress
Description
Indicates the current heartbeat timeout
in milliseconds.
Selects the GEV option to query for
existing support.
Returns whether the selected GEV
option is supported.
True The selected option is supported.
False The selected option is not supported.
Displays the unique 48-bit MAC (Media
Access Control) address of the Device,
in hexadecimal.
Controls whether the LLA (Link Local
Address) IP configuration scheme is
activated on the given network
interface.
Controls whether the DHCP IP
configuration scheme (Dynamic Host
Configuration Protocol) is activated on
the given network interface.
Controls whether the PersistentIP
configuration scheme is activated on
the given network interface.
Reports the IP address for the given
network interface.
Reports the subnet mask of the given
interface.
Reports the default gateway IP address
to be used on the given network
interface.
Reports the current IP configuration
status.
Device IP Address Configuration is set
PersistentIP
to Persistent IP (static).
DHCP Device IP Address Configuration is set
to DHCP (Dynamic Host Configuration
Protocol). Network requires a DHCP
server.If a DHCP server is not present,
the camera will switch to LLA mode
and periodically send requests for an IP
address until a DCHP server
acknowledges the request.
Device IP Address Configuration is set
LLA
to LLA (Link-Local Address). Also
known as Auto-IP. Used for
unmanaged networks including direct
connections from a device to a
dedicated NIC.When using LLA mode,
the camera will not request an IP
address from a DHCP server (even if
present).
Persistent IP address for the selected
interface. This is the IP address the
camera uses when booting in
Persistent IP mode.
Operational Reference • 139
View
Guru
Beginner
Beginner
Beginner
Beginner
Beginner
Beginner
Beginner
Beginner
Beginner
Guru
Guru